![]() In the figure the distorted signal at Port 1 is conditioned by transmitting the delay distorted input signal to the input of Port 2. Fibre dispersion compensation of a distorted signal. This can also be done using a three-port optical circulator as shown in the following figure.įigure 3. In the second example, we consider the application of a Fibre-Bragg grating compensator to correct a distorted signal. The weak signal at Port 2 is pumped by a 980nm pump lasers and the amplified signal is then transmitted from port 2 to the output Port 3. In the figure, a weak optical signal at 1550nm is input to Port 1 and is directed to Port 2. Amplification of an input optical signal by a pump laser. The configuration to do this with a three-port optical circulator is shown in the following figure.įigure 2. The first is an EDFA amplifier (erbium doped fibre amplifier) application to amplify a signal. Two simple examples of optical circulators can be considered. ![]() In practice, one or two ports are used as inputs and the third port is used as the output. The name derives from the fact that a signal is transmitted from Port 1 to Port 2, another signal can be transmitted from Port 2 to Port 3 and, finally, a signal can be transmitted from Port 3 to Port 1. This behavior is represented by the following.įigure 1 Conventional figure to represent the behavior of an optical circulator. In a 3-port circulator a signal is transmitted from port 1 to port 2, another signal is transmitted from port 2 to port 3 and, finally, a third signal can be transmitted from port 3 to port 1. Optical circulators have continued to increase their presence in a broad array of applications, including optical amplifiers, optical add and drop systems, dense wavelength-division multiplexing (DWDM Mux) networks and, optical time domain reflectometers (OTDRs). This action prevents the signal from propagating in an unintended direction. These devices that are used to direct the optical signal from one port to another port and in one direction only. Another type of passive element that is commonly used in fibre optic systems is the optical circulator. They are ideal for carrying in a toolbox, to cure interference issues.In fibre optical networks passive components such as optical isolators are essential for delivering of signals with minimum loss. They are built in cylindrical plastic (for isolation) enclosures, fitted with a BNC connector at each end. The 元GGI01 may be used with 3G, HD or SD SDI signals while the LHDGI01 may be used with HD or SD SDI. The L4KGI01 is for use with full 12G/4K UHD SDI video and all lower standards including 6G, 3G, HD and SD SDI. There are three ranges with different housings one range has encapsulated enclosures which may be rack-mounted with an accessory panel, one has in-line 'barrels', with or without a mounting flange, the third offers designs with higher breakdown voltage for medical grade applications, and are available both constructed in ABS boxes with mounting flanges and as 'barrel' versions, with or without a mounting flange. Both the signal and ground paths between equipment are isolated, there is no distortion of the signal. This method out-performs broadband transformers for SDI signals. The LEN L4KGI0 ground isolators use broadband high-pass filters to provide complete galvanic isolation of DC currents between two pieces of equipment, while permitting the full bandwidth of SDI signal to pass, thus avoiding problems of signal distortion and operator shocks caused by a voltage difference.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |